Handicap 14 but last 6 games 7 8 9 etc what is best taylormade irons to develope my game. jimmy
james johnson
01/15/2010 3:59 PM
The Burner 2009 iron set is by far my most popular game improvement set so I know you will have success with it. You may also want to try the new Taylor Made R9 irons which may appeal to lower handicappers a little more than the Burners.
Golfballs.com Employee: Andy
01/21/2010 8:54 AM
For the Shaft Material, what is the difference between steel and graphite?
when you playing can you tell the diffence?
J
10/27/2009 1:39 PM
Yes you will be able to notice a difference. The weight is significantly lighter with graphite and you should be able to gain distance because of it. Due to higher torque in graphite, the head will twist a little more at impact making your accuracy slightly lower than with steel. Graphite is a softer feeling shaft as it offers a vibration dampening effect. Also with graphite you will notice a higher ball flight.
Golfballs.com Employee: Andy
10/27/2009 1:58 PM
Can the shafts get extended by 1 inch aswell?
Melvin Streefkerk
10/22/2009 10:01 AM
Yes, I can have clubs built for you directly through Taylor Made. Please contact me at 1-800-372-2557 to place a custom order. Thanks! Andy
Golfballs.com Employee: Andy
10/22/2009 1:24 PM
Is this a good club for as high handicapper ?
Francisco
10/15/2009 10:02 AM
The 2009 Burner irons are excellent game improvement irons designed to help you get the ball in the air quicker, and stay in the air longer! This club is great for all skill levels.
Golfballs.com Employee: Andy
10/15/2009 11:03 AM
Available with stiff shafts?
Stephen
10/14/2009 10:13 PM
hi, thanks for your question. WE do have this set available in a stiff shaft. -Parker
Golfballs.com Employee: Parker
10/15/2009 8:57 AM
How do i know if the set is real genuine from taylor made ? WOwogolf sell clone for cheaper... they look exactly the same
mike
08/27/2009 8:18 AM
Hi, thanks for your question. This is a real, genuine set. We are an authorized Taylor Made distributor. -Parker
Golfballs.com Employee: Parker
08/27/2009 4:13 PM
are these graphite shafts for 699.95?
John lee
07/22/2009 9:17 PM
The $699.95 is the set listing in steel shafts. The 2009 Burner irons in graphite are $899.95. Thanks. Andy.
Golfballs.com Employee: Andy
07/23/2009 9:55 AM
I just need a lob wedge for 2009 Burner Irons do you have this item in stock? I have the iron set and just need the Lob wedge....
Richard Buffington
06/24/2009 8:09 AM
Richard, I can special order the wedges for you if neccessary but I do not keep them in stock regularly. Please give me a call to inquire about special ordering any of the wedges. Thanks. Andy.
Golfballs.com Employee: Andy
06/26/2009 1:44 PM
Hi, I saw that you listed the different types of shaft available in the burner iron. Do you know which shaft the majority of pros are using in their burner irons? thanks
Jason
06/19/2009 10:22 PM
Jason, the most popular tour shafts on tour right now are the True Temper Dynamic Gold, the Rifle Project X, the KBS Tour shafts. All of these shafts are between 120-130 gram weight and are all avaialble through Taylor Made currently. If you were interested in placing an order with custom shafts, please contact us at 1-800-372-2557. Thanks!
Golfballs.com Employee: Andy
06/23/2009 5:00 PM
Are the new 2009 burner irons available in different lies for taller players?
Pete
06/10/2009 10:27 AM
Thank you for inquiring about the 2009 Taylor Made Burner irons. Yes, you may customize the iron set to have any lie angle or custom shaft length you may need to fit your swing.
Golfballs.com Employee: Andy
06/10/2009 11:00 AM
I keep reading about length of shaft, measuring wrist to floor, I am short, so what does this measurement tell me and how do I apply it to shaft length
Anonymous
06/02/2009 9:17 AM
Thank you for your question in regard to shaft lengths. The measurement from wrist to floor will determine which length you will need your shaft set at. Typically, shorter golfer will need their irons/woods cut down in order to maximize proper impact. Please determine the length of your arm from wrist to floor from a standing upright position with your arms at your side and I can determine the optimal length for you.
Golfballs.com Employee: Andy
06/03/2009 10:21 AM
Also your wrist to floor measurement will determine what lie angle you need. I'm 5'3" and I needed my clubs flattened 3 degrees from standard! Look into it!
Low Handicap Golfer: Luke
08/13/2009 1:06 PM
playing the OS RAC bought in 2003....love them BUT I'm wondering if the new Burner irons would bring my game an improvement ( 12 hdcp)..I seem to struggle hitting straight shots from the fairway...wil
Anonymous
05/25/2009 5:23 PM
Thank you for your inquiry. The 2009 Taylor Made Burner irons are vastly improved from the RAC predecessor. You will see greater forgiveness on the new irons and better performance in all areas.
Golfballs.com Employee: Andy
05/27/2009 4:18 PM
What are the "spec's" .. beginning with the 3 Iron through the P/W?
Anonymous
05/25/2009 12:07 PM
Thank you for your inquiry regarding the 2009 Taylor Made Burner set. The loft/lie angles are as follows: 3i 19* loft 60.25* lie, 4i 21* loft 61* lie, 5i 24* loft 61.75* lie, 6i 27* loft 62.5* lie, 7i 31* loft 63* lie, 8i 35* loft 63.5* lie, 9i 40* loft 64* lie, PW 45* loft 64.5* lie. Please let me know if you have any further questions. Thanks.
Golfballs.com Employee: Andy
05/26/2009 3:02 PM
What kind of steel shafts are installed?(regular/stiff) any other selection available?
Anonymous
05/25/2009 11:23 AM
Thank you for your inquiry. The stock steel shaft is an 85 gram shaft made by True Temper designed specifically for Taylor Made. Some of the upgrade and custom shaft options you may choose from include, the True Temper Dynamic Gold, The Rifle Precision Flighted, the Rifle Project X, the KBS Tour and the Nippon NS Pro iron shafts.
Golfballs.com Employee: Andy
05/27/2009 2:48 PM
I am a average golfer looking for new clubs...current set had extra inch added to shaft length, but not sure I needed it. I am 6'2"...would a custom club fitting be recommended or would std shaf
Anonymous
05/20/2009 6:36 PM
Thank you for your inquiry. Typically guys your height will need added length to the shaft with an upright lie angle. Your arm length from wrist to floor will give a better idea as to how much additional length is needed. The majority of golfers in your height range would benefit from a 1/2" extended shaft and a 2 degree upright lie angle. The custom iron set will definately improve your ball striking ability and your consistency in your iron play. Please give us a call if you have further quest
Golfballs.com Employee: Andy
05/21/2009 8:44 AM
I have old clubs looking to buy new how do I tell if my clubs are to long or short.
Mid Handicap Golfer: David
09/04/2009 6:32 PM
What are the lofts on the A Wedge / Sand wedge / pitching wedge?
Anonymous
05/07/2009 12:36 PM
Thank you for your question.
A Wedge - 50 Degree
S Wedge - 55 Degree
P Wedge - 45 Degree
Play Well,
Johnny
Golfballs.com Employee: Johnny
05/07/2009 2:46 PM
Can you purchase the set in the 5 thru the sw. This would enclude the 5,6,7,8,9,pw,aw, & sw?
Anonymous
04/22/2009 10:17 AM
Thank you for your question.
We can do this for you. Since it's a "custom" order we'd need you to call us at 1-800-372-2557 and we can make it happen.
Thanks,
Johnny
Golfballs.com Employee: Johnny
04/22/2009 3:09 PM
Do you have these clubs in stock in left handed and also do you ship APO?
Thank you
Anonymous
03/31/2009 6:55 AM
Thank you for your question.
We presently don't have a set in house but we could order one. Once we receive it we could ship it to your APO.
I hope this helps and let me know if you have any other questions.
Thanks,
Johnny
Golfballs.com Employee: Johnny
04/01/2009 12:14 PM