I am a low 20s handicapper. I have used the Big Bertha for the last 2 years. Will these help me to move down?
Bill Wunsch
10/14/2009 4:06 PM
Bill, the Big Bertha series as actually designed to be more forgiving than the X-series. While both are considered game improvement, you will find the Big Bertha irons are easier to get airborne from touger lies. The newer irons in the Big Bertha series are great for 20+ guys looking for lower scores.
Golfballs.com Employee: Andy
10/15/2009 9:39 AM
I play '08 Calloway Big Bertha irons with a steel shaft. I'm an 18 handicap. I selected them because I was told they were right for someone in my handicap range -- I was a 21 then. Will I be upgrading
Ken
10/14/2009 2:35 PM
Good question. Technically the X-22 are still considered game improvement irons so you should be able to hit them fairly well. The Big Bertha series offers a wider sole which helps getting the ball airborne more quickly and comes with a deeper cavity for more forgiveness. The X-22 may be a little sleeker than the Bertha set but from a handicap standpoint you will not see a big enough difference to promote change just yet.
Golfballs.com Employee: Andy
10/14/2009 3:36 PM
Are the x-18s are good clubs?
Alex
10/03/2009 3:58 PM
I love mine have had them for about 3 years now.
Mid Handicap Golfer: Ross
10/05/2009 7:36 PM
The X-18 was the best selling X series iron that Callaway has ever produced which is the reason for re-releasing the iron set for sale. Its a forgiving iron with a sleek look that suits all game play levels.
Golfballs.com Employee: Andy
10/06/2009 9:28 AM
What's the "R" stand for? And are these cheaper than the non "R" clubs?
Tom
09/07/2009 7:03 PM
The R stands for "refresh" as the X-18 was originally released in 2004 and the X-18R is basically a re-release of the original club with slight modifications.
Golfballs.com Employee: Andy
09/09/2009 11:27 AM
I CANNOT FIND AN INDIVUAL CALLOWAY X18R LOB WEDGE FOR SALE THATS NEW.
FRED WOLIVER
09/02/2009 9:14 AM
Thank you for your question. The X-18R were not produced with options to purchase individual clubs. The 4-P with SW set is the only option.
Golfballs.com Employee: Andy
09/03/2009 1:45 PM
is the uniflex, just a name of the shaft.or it;s stiff or R/flex on the X18R.
EDWARD BONNER
07/21/2009 3:48 PM
The uniflex is a "mens" flex that has a stiffness frequency in between the stiff and regular flexes.
Golfballs.com Employee: Andy
07/21/2009 5:31 PM
I have a set of 2006 Big Bertha clubs steel shaft and can't remember if they are stiff or uniflex? Want to figure out what I am using now before I buy a new set. Is there a way to tell which they ar
Matt
07/15/2009 6:05 PM
Thank you for your question. The stock shaft in the Big Bertha 06 set is a uniflex steel shaft.
Golfballs.com Employee: Andy
07/16/2009 5:00 PM
is a Gap wedge available in the x18r iron and if not what is the degree of the sand wedge in the x18r?
John
06/29/2009 6:02 PM
I'm sorry but it is not available. The SW is 56 Degrees.
Thanks.
Golfballs.com Employee: Johnny
06/30/2009 1:24 PM
I am going to purchase a set of more advanced irons up from my starter set. But, i was wondering if i should go for the x-22's or the x-18 r's. What is the difference between the two clubs? This is he
Anonymous
06/16/2009 4:35 PM
Ryan, good question. The X-22 irons are the more forgiving of the two options. As the X-18R set is a great iron set and is made with similar materials, the X-22 offers a deeper cavity and lower center of gravity making each your miss hits perform at a higher level.
Golfballs.com Employee: Andy
06/17/2009 3:27 PM
I keep reading about length of shaft, measuring wrist to floor, I am short, so what does this measurement tell me and how do I apply it to shaft length
Anonymous
06/02/2009 9:17 AM
Thank you for your question in regard to shaft lengths. The measurement from wrist to floor will determine which length you will need your shaft set at. Typically, shorter golfer will need their irons/woods cut down in order to maximize proper impact. Please determine the length of your arm from wrist to floor from a standing upright position with your arms at your side and I can determine the optimal length for you.
Golfballs.com Employee: Andy
06/03/2009 10:21 AM
Also your wrist to floor measurement will determine what lie angle you need. I'm 5'3" and I needed my clubs flattened 3 degrees from standard! Look into it!
Low Handicap Golfer: Luke
08/13/2009 1:06 PM
I am a average golfer looking for new clubs...current set had extra inch added to shaft length, but not sure I needed it. I am 6'2"...would a custom club fitting be recommended or would std shaf
Anonymous
05/20/2009 6:36 PM
Thank you for your inquiry. Typically guys your height will need added length to the shaft with an upright lie angle. Your arm length from wrist to floor will give a better idea as to how much additional length is needed. The majority of golfers in your height range would benefit from a 1/2" extended shaft and a 2 degree upright lie angle. The custom iron set will definately improve your ball striking ability and your consistency in your iron play. Please give us a call if you have further quest
Golfballs.com Employee: Andy
05/21/2009 8:44 AM
I have old clubs looking to buy new how do I tell if my clubs are to long or short.
Mid Handicap Golfer: David
09/04/2009 6:32 PM
Is this a re-released or re-branded club club. I thought these were sold around 2005?
Anonymous
04/20/2009 12:14 PM
Thank you for your question.
The X-18's were originally released around 2005. The X-18R is a New Iron Set that was just launched. It's more of a pricing point iron set without the bells and whistles that make up the current X-22's.
Please let me know if you have any other questions.
Thanks,
Johnny
Golfballs.com Employee: Johnny
04/20/2009 4:35 PM
What actually is an X-18R,(R) and how does it compare to the X-18's. I have heard the "R" means refurbished.
Anonymous
04/15/2009 4:41 AM
Thank you for your question. The difference between the 2009 Callaway X-18 Refresh irons and the original is in the manufacturing. The irons are brand new and are not refurbished. The technical difference is that the shaft does not bore through the head of the iron as in the original X-18 set. The change does not effect the performance of the club which makes the 2 iron sets basically equal.
Golfballs.com Employee: Andy
04/21/2009 5:15 PM
I recently purchased a set of the X18R's and after reading various explanations on what the "R" meant decided to call Callaway Customer Service myself to find out and was told it stands for "Re-Launch" in response to the popularity of the original X18's. The big difference is the originals had a bore thru hozel. The X18R's don't.
Mid Handicap Golfer: Carol
10/27/2009 9:51 AM
are the x 18s available with stiff shaft?
Anonymous
03/18/2009 6:59 PM
Thank you for your question.
I'm sorry but they are not. These are only available in a Uniflex Flex.
Please let me know if you have any other questions.
Thank you,
Johnny
Golfballs.com Employee: Johnny
03/19/2009 11:25 AM