The new burner driver or the cobra L4V for a senior what is the the better or is there one.
Cliff Mckercher
09/28/2009 6:09 PM
The Burner will be the longer of the two with a slightler lighter shaft with an added inch for more distance off the tee.
Golfballs.com Employee: Andy
09/29/2009 9:28 AM
My ball speed is around 138-140mph. For the stock shaft of the Burner 09 10.5, should I go to regular or stiff?
thanks.
Bertrand
09/24/2009 9:53 PM
That ball speed typically comes from a club head speed in the mid 90's which can go either way into stiff or regular. If you get the chance to try them both you may benefit from being able to see the difference.
Golfballs.com Employee: Andy
09/25/2009 10:03 AM
How can I order R/handed Driver and fair way woods in the BURNER models with extend length and senior shafts. Driver 9-deree loft.
Stan Decker
09/14/2009 12:24 PM
This would be considered a custom order. Please call us at 1-800-372-2557 and we'll be more than happy to help you with this order.
Thanks.
Golfballs.com Employee: Johnny
09/15/2009 9:32 AM
I am looking for a left-hand Burner
with senior shaft and 15 degree loft. Is this available?
Jane
08/29/2009 12:54 PM
Hi, we do not have this club in stock. I will be able to ship it directly from the manufacturer if it is something you are interested in. -Parker
Golfballs.com Employee: Parker
08/31/2009 9:47 AM
I am left-handed and i slice a little. I have an Acuity driver now. Do you think the the 09 Burner could straighten my drives
Cody
07/21/2009 9:54 PM
The 09 Burner is a hit MOI driver therefore should increase your accuracy over your current driver. You still may have a slice however it shouldnt be a severe with the Burner.
Golfballs.com Employee: Andy
07/23/2009 9:58 AM
I've been told by 2-3 sources (golf shops, reps at demo days, etc.) that the high trajectory burner is 13 degrees loft. I just read on this sight that it is 15 degrees. Can you tell me which it is f
Anonymous
06/01/2009 6:20 PM
Mike,
Thanks for your email. I looked on our site but didn't see the 15 degree notation. After checking out www.taylormadegolf.com they list it as 12 Degree. Sorry for any confusion.
Thanks,
Johnny
Golfballs.com Employee: Johnny
06/02/2009 1:17 PM
Hello,
I understand most drivers come in a 10.5 and 9.5 degree loft. I use a 10.5. When teeing off, my ball usually has a lot of loft and goes really high in the air, should I switch to a 9.5 degree
Anonymous
05/31/2009 11:46 AM
Thank you for your question.
Is it worth testing out? Absolutely. Will the 9.5 give you a more penetrating ball flight is the question. Most golfers would kill to have more hang time but I know how you feel. I was in the same boat at one time and tested different lofts much like you. I ended up staying with the higher loft though. I would test it prior to officially making a move.
Play Well,
Johnny
Golfballs.com Employee: Johnny
06/03/2009 6:33 AM
The higher loft will also be more controllable of the tee..
Mid Handicap Golfer: Howard
10/02/2009 5:37 AM
If you are not a low handicap golfer, where you play can make a lot of difference in driver loft choices. In the northern US. especially on the plains, wind can be a huge factor in driver loft effect. We have 160 yd par 3's where 10/12 handicap golfers are using drivers straight into a 35 mph wind. I use a 9.5 TM Burner draw. But I have a Titlist 10.5 I take to Phoenix (low or no wind) and FL (tree lined courses). High trajectory on windy links courses can really beat you up with a high loft. //
Mid Handicap Golfer: Don
10/12/2009 12:47 PM
In general, the 9.5 degree will tend to give a lower ball flight. However, the shaft also contributes to launch angle. Find a Golf shop that has a simulator that can measure your swing path, launch angle, club-head speed, ball speed, spin and distance. With this information, your Pro can tell you if you need a different club, or just a new shaft.
Mid Handicap Golfer: Jim
03/10/2010 1:02 PM
my avg swing speed is about 80 to 90 . what would be the best Shaft Flex for me
Anonymous
05/23/2009 7:25 PM
Thank you for your question.
You would fall in the 'Regular' flex category based upon your swing speed.
Please let me know if you have any other questions.
Thank you,
Johnny
Golfballs.com Employee: Johnny
05/25/2009 8:53 AM
You're definitely a regular flex
Senior flex starts from 70-80
Regular is from 80 to about 100
Stiff 100 to 115ish
X-stiff 115+
Low Handicap Golfer: Jamie
06/15/2009 3:17 AM
My driver swing speed is 90mph, straight ball flight, and using the Burner driver, I need a stiff shaft. With the regular I do not have the same control as with the stiff shaft and distance is almost identical. Try one out on a range or on a monitor. Swing speeds do not always reflect the correct shaft for your swing. It's only a generic number but is a good starting point.
Low Handicap Golfer: Bill
03/16/2010 12:36 AM
try the mizuno shaft fitting
Mid Handicap Golfer: Matt
04/25/2011 4:44 PM
I have used the YS-6 shaft in the 905T and the FT-i with pretty good success. Can you name me a couple other shafts that you think would give me the same "feel" and control? Thanks.
Anonymous
05/23/2009 5:44 AM
Thank you for your inquiry. There are a few other brands that have similar weight and launch profiles of the Graphite Design YS series. You should notice that the Aldila NVS 65, the Graphalloy ProLaunch 65, the UST V2 67, and the Fujikura E360 are all very comparable.
Golfballs.com Employee: Andy
05/26/2009 1:42 PM
i have the graphalloy prolaunch 65 and it works great!is is very flexible.
Mid Handicap Golfer: alfred
06/28/2009 10:34 PM
What is the difference between the brand name shafts that you offer with the new 09 burner. IE: RE*AX Superfast 49, Aldia VS Proto 65, NV-65 and Graphite Design YSQst 65. Also the best or normal lof
Anonymous
05/04/2009 1:35 PM
Thank you for your question. The custom shaft offerings are offered for golfers looking to fine tune their game. The REAX shaft made for Taylor Made is a shaft geared strictly for high ball flight and increasing your club head speed at the 49 gram weight. The custom shafts are considerably heavier which will help you control your ball flight more. The mentioned shafts in your question are all of the 65 gram weight. Some of the shafts boast stiffer tips or provide lower torque outputs to maximize
Golfballs.com Employee: Andy
05/05/2009 2:30 PM
I bought the TaylorMade R7 Draw, and I still slice the ball to the right. Why is this. Thanks
Anonymous
05/04/2009 6:58 AM
Thank you for your inquiry. The R7 draw you purchased is designed to help reduce your tendency to slice or promote the effect of a draw if at all possible. The draw driver will not eliminate your slice, it will only help you reduce it.
Golfballs.com Employee: Andy
05/05/2009 2:00 PM
How does the '09 burner driver compare to the tour burner driver?
Anonymous
04/21/2009 8:37 PM
Good question. The 09 Burner is designed to increase ball speed and distance with the "efective" MOI at the highest possible setting while the Tour Burner will offer slightly more ball control while keeping distance to a maximum. For additional inquiries, please feel free to contact us at 1-800-372-2557. Thanks!
Golfballs.com Employee: Andy
04/25/2009 11:23 AM
What is the loft of the High Trajectory
Thanks
Anonymous
03/31/2009 1:20 PM
Thank you for your question.
The loft on the High Trajectory is 15 Degrees.
Play Well,
Johnny
Golfballs.com Employee: Johnny
03/31/2009 1:31 PM
My avg club speed was measured to be 108 mph , should I be looking at a extra stiff shaft
Anonymous
02/21/2009 5:01 PM
That clubhead speed is considered to be high enough for an extra stiff. Typically speaking, anyone who can swing their driver 105+ should be in extra stiff.
Golfballs.com Employee: Andy
02/24/2009 2:00 PM
which shaft is better between regular and stiff
Anonymous
01/19/2009 11:12 PM
Great Question. Everything is subjective to your swing though. Do you tend to swing slower or more quickly? The rule of thumb is that if your swing speed is slower than 95mph then you should probably get a regular flex driver and if your swing is over 100mph then you should probably get a stiff flex driver. That leaves a little grey area that you from 95 to 100 where you can use either flex.
I hope this helps.
Golfballs.com Employee: Johnny
01/20/2009 3:26 PM