Hello what would it cost to have the Ping G10 7.5 degree head with a Accra XE -80 M-4 Flex and 2.2 torque shaft put together. Thanks Wade
Wade Logan
03/14/2010 4:53 PM
Ping does not offer the Accra series shafts. I can get the 7.5 degree driver with custom shafts from Ping but that option is not available.
Golfballs.com Employee: Andy
03/18/2010 8:57 AM
Is there a G10 tour model? I noticed the heads were slightly closed about a degree or so and I am looking for either a neutrl or open which would be found on a tour model. Thanks.
Chip
12/02/2009 11:01 AM
In the 10 series there is no tour option. In the new 15 seies the tour version is the I15.
Golfballs.com Employee: Andy
12/03/2009 3:26 PM
I have a taylormade burner 10.5 of loft with a reg flex fujikura shaft. Nice looking but I hit my Cobra 3Wood longer and straighter. I tried the G/10 great but what shaft should I get w/98 swing speed
JonMarc
12/01/2009 9:05 PM
With your clubhead speed I would stick in the stiff shaft spectrum. The G10 and G15 drivers are excellent options. The Ping TFC Stiff shaft will work well for you.
Golfballs.com Employee: Andy
12/02/2009 2:29 PM
Hi there,i would like to buy a ping G10 7.5 loft driver head, no shaft,if possible how much would it cost with delivery to Australia included.Thanks
Marc Dalton
08/01/2009 5:31 AM
Thank you for your question. I am unable to see components only. If you would like to get a Ping G10 driver from me, if will have to be built with shaft.
Golfballs.com Employee: Andy
08/04/2009 9:15 AM
What is the difference among the three graphite regular flex shafts offered in the G10 Driver?
Robert Tomaine
07/12/2009 11:09 AM
Bob, the TFC from Ping is a mid-launching shaft, while the UST V2 is a high launch and the Grafalloy ProLaunch Red is a low launching shaft.
Golfballs.com Employee: Andy
07/14/2009 4:34 PM
Hello,
I understand most drivers come in a 10.5 and 9.5 degree loft. I use a 10.5. When teeing off, my ball usually has a lot of loft and goes really high in the air, should I switch to a 9.5 degree
Anonymous
05/31/2009 11:46 AM
Thank you for your question.
Is it worth testing out? Absolutely. Will the 9.5 give you a more penetrating ball flight is the question. Most golfers would kill to have more hang time but I know how you feel. I was in the same boat at one time and tested different lofts much like you. I ended up staying with the higher loft though. I would test it prior to officially making a move.
Play Well,
Johnny
Golfballs.com Employee: Johnny
06/03/2009 6:33 AM
The higher loft will also be more controllable of the tee..
Mid Handicap Golfer: Howard
10/02/2009 5:37 AM
If you are not a low handicap golfer, where you play can make a lot of difference in driver loft choices. In the northern US. especially on the plains, wind can be a huge factor in driver loft effect. We have 160 yd par 3's where 10/12 handicap golfers are using drivers straight into a 35 mph wind. I use a 9.5 TM Burner draw. But I have a Titlist 10.5 I take to Phoenix (low or no wind) and FL (tree lined courses). High trajectory on windy links courses can really beat you up with a high loft. //
Mid Handicap Golfer: Don
10/12/2009 12:47 PM
In general, the 9.5 degree will tend to give a lower ball flight. However, the shaft also contributes to launch angle. Find a Golf shop that has a simulator that can measure your swing path, launch angle, club-head speed, ball speed, spin and distance. With this information, your Pro can tell you if you need a different club, or just a new shaft.
Mid Handicap Golfer: Jim
03/10/2010 1:02 PM
my avg swing speed is about 80 to 90 . what would be the best Shaft Flex for me
Anonymous
05/23/2009 7:25 PM
Thank you for your question.
You would fall in the 'Regular' flex category based upon your swing speed.
Please let me know if you have any other questions.
Thank you,
Johnny
Golfballs.com Employee: Johnny
05/25/2009 8:53 AM
You're definitely a regular flex
Senior flex starts from 70-80
Regular is from 80 to about 100
Stiff 100 to 115ish
X-stiff 115+
Low Handicap Golfer: Jamie
06/15/2009 3:17 AM
My driver swing speed is 90mph, straight ball flight, and using the Burner driver, I need a stiff shaft. With the regular I do not have the same control as with the stiff shaft and distance is almost identical. Try one out on a range or on a monitor. Swing speeds do not always reflect the correct shaft for your swing. It's only a generic number but is a good starting point.
Low Handicap Golfer: Bill
03/16/2010 12:36 AM
try the mizuno shaft fitting
Mid Handicap Golfer: Matt
04/25/2011 4:44 PM
I have used the YS-6 shaft in the 905T and the FT-i with pretty good success. Can you name me a couple other shafts that you think would give me the same "feel" and control? Thanks.
Anonymous
05/23/2009 5:44 AM
Thank you for your inquiry. There are a few other brands that have similar weight and launch profiles of the Graphite Design YS series. You should notice that the Aldila NVS 65, the Graphalloy ProLaunch 65, the UST V2 67, and the Fujikura E360 are all very comparable.
Golfballs.com Employee: Andy
05/26/2009 1:42 PM
i have the graphalloy prolaunch 65 and it works great!is is very flexible.
Mid Handicap Golfer: alfred
06/28/2009 10:34 PM
What is the determining factor for getting the G10 Draw Driver as opposed to the G10 Driver. I don't know which one I should get.
Thank you
Anonymous
05/21/2009 11:51 AM
Thank you for your inquiry. The draw version is designed to help reduce your tendancy to slice. If you consistenly slice the ball then the draw version is the better option.
Golfballs.com Employee: Andy
05/21/2009 3:46 PM
I am looking to get into a G10 but am having trouble finding the right shaft. My SS is between 110 and 118 with a quick tempo. The guys at Pro Golf didn't have the TFC 129D X shaft for me to hit. B
Anonymous
05/14/2009 11:30 AM
Thank you for your inquiry, as you have a very high club head speed which the X flex would suit very well. For ordering inquiries please contact me at 1-800-372-2557.
Golfballs.com Employee: Andy
05/18/2009 8:35 AM
What is the difference in the stiff graphite shafts that are offered?
Anonymous
04/19/2009 11:16 AM
Thank you for your question. The main difference between the 3 is the launch conditions produced. The Grafalloy Pro Launch Red will offer the lowest ball flight of the three. The PING TFC will offer medium height launch while the V2 HL will offer higher ball flights. For ordering, please contact me at 1-800-372-2557. Thanks!
Golfballs.com Employee: Andy
04/25/2009 11:41 AM
My avg club speed was measured to be 108 mph , should I be looking at a extra stiff shaft
Anonymous
02/21/2009 5:01 PM
That clubhead speed is considered to be high enough for an extra stiff. Typically speaking, anyone who can swing their driver 105+ should be in extra stiff.
Golfballs.com Employee: Andy
02/24/2009 2:00 PM
which shaft is better between regular and stiff
Anonymous
01/19/2009 11:12 PM
Great Question. Everything is subjective to your swing though. Do you tend to swing slower or more quickly? The rule of thumb is that if your swing speed is slower than 95mph then you should probably get a regular flex driver and if your swing is over 100mph then you should probably get a stiff flex driver. That leaves a little grey area that you from 95 to 100 where you can use either flex.
I hope this helps.
Golfballs.com Employee: Johnny
01/20/2009 3:26 PM